基于2-丙基-4，5-二甲酸咪唑和4,4-联吡啶的镉(Ⅱ)配位聚合物的合成、晶体结构及荧光性质

通过水热法合成得到了一个包含四核镉(Ⅱ)的基于2-丙基-4,5-二甲酸咪唑和4,4-联吡啶的配位聚合物[Cd2(HPIDC)2(bpy)(H2O)2](1)。X-射线单晶衍射分析结果表明:配合物1属单斜晶系,结晶在c2/c空间群中,晶胞参数为:a=1.936 6(4)nm,b=1.504 1(3)nm,c=2.200 4(5)nm,β=94.990(4)°,V=6.385(2)nm3,Z=8,1.393 mm-1,F(000)=3 216,Dc=1.684 g.cm-3,R1=0.045 8,wR2=0.108 9。通过链间的O-H…O氢键作用,形成了三维的超分子结构。固体荧光测试表明:配合物1在427 nm处发射出较强的荧光。     

以T型三羧酸配体构筑的具有2D→3D穿插结构的金属有机框架的合成、结构及性质

采用溶剂热合成法,利用T型三羧酸配体3,4',5-联苯三羧酸(H₃BPT=biphenyl-3,4',5-tricarboxylic acid)制备并表征了2个2D→3D穿插结构的金属有机框架结构,{[Ni₃(BPT)₂(bpe)₂(H₂O)₆]·2DMF·7H₂O}n (1)和{[Ni₃(BPT)₂(bpea)₂(H₂O)₆]·2DMF·5H₂O}n (2)(bpe=1,2-bis(4-pyridyl)ethylene,bpea=1,2-bis(4-pyridyl)ethane,DMF=N,N-dimethylformamide).在这2个化合物中,BPT配体和含氮配体bpe或bpea共同连接相邻的Ni(Ⅱ)中心,形成(3,4)-连接的(6³)(6⁵.8)二维双层结构.相邻双层结构间相互穿插,形成具有聚轮烷结构的2D→3D互锁结构.气体吸附性质表明,化合物1对CO₂和N₂具有一定的吸附能力.     

谷氨酸功能胶束温和催化水解甲基-β-D-纤维二糖苷

合成了一种含有谷氨酸残基的长链烷基表面活性剂N^α-十二烷基-L-谷氨酸. 研究了表面活性剂所形成的胶束体系在较温和条件下催化纤维素模型物甲基-β-D-纤维二糖苷(MCB)水解的反应. 研究表明此功能胶束对MCB水解为葡萄糖的反应在较低的温度(90℃)下就表现出明显的催化作用, 在pH 5.0附近具有最佳的催化水解效果.根据胶束催化的相分离模型获得MCB水解的一级反应速率常数(km).研究了胶束与组氨酸(His)或谷氨酸(Glu)所组成的复配体系对MCB的催化水解作用. 结果表明: 氨基酸小分子的加入极大地促进了水解反应的进行, 而胶束与氨基酸在1:1的摩尔浓度配比时催化效果最好. 温度对水解反应速率以及副产物的产生有明显的影响. 在130℃, pH 5.0的水溶液中, 胶束与谷氨酸的复配体系催化MCB水解反应1.5 h后的葡萄糖收率可达到36.6%. 本文也对此催化体系催化MCB水解反应动力学进行了研究, 获得了催化反应的表观一级速率常数(k_obsd), 计算得到催化水解反应生成葡萄糖的活化能(E_a)为97.18 kJ·mol^-1.     

系列硅铝比纳米薄层ZSM-5分子筛的合成和表征

以自制不对称双子季铵盐表面活性剂为模板, 在水热合成体系中控制合成系列硅铝比纳米薄层ZSM-5分子筛.采用X射线衍射(XRD)、N₂吸附-脱附、X射线荧光光谱(XRF)、扫描电镜(SEM)和²⁷Al魔角旋转核磁共振(²⁷Al MAS-NMR)对合成的样品进行了表征. 详细研究了晶化温度、晶化时间、结构导向剂(SDA)用量、碱度等对合成的影响和纳米薄层ZSM-5分子筛的形成过程. 结果表明: 分子筛硅铝比越高, 结构导向剂用量越大, 所需的晶化时间越短; 晶化温度越高, 晶化时间越短; 且不同硅铝比纳米薄层ZSM-5分子筛的形貌规整度、比表面积和介孔/微孔孔容比例随着硅铝比而变化.     

Ce3+掺杂La2O3的17O固体核磁共振研究

本文用水热共沉淀法制备Ce³⁺掺杂La₂O₃的前驱体,随后在H₂/N₂气氛下用高温煅烧法合成了不同Ce³⁺浓度的掺杂La₂O₃。由于Ce³⁺的掺杂,¹⁷O固体核磁共振谱图中在698、650和558处出现了新的共振峰;随着Ce³⁺掺杂浓度的增加,这些峰的强度也随之增强。根据谱峰位置和强度,对谱图进行了归属：698、650处的共振峰应源自与Ce³⁺相连的四配位O(OCeLa₃),558处的信号则来自于与Ce³⁺相连的六配位O(OCeLa₅)。通过¹⁷O固体核磁共振能够直接观测与Ce³⁺直接相连的O显示该方法将可能用于研究稀土掺杂氧化物功能材料。     

2,2'-联吡啶-3,3',6,6'-四羧酸过渡金属配合物的合成、结构及性质

以2,2'-联吡啶-3,3',6,6'-四羧酸(H₄bptc)为配体,通过水热合成的方法与过渡金属盐合成了3个配合物,其分子式分别为[Co₂(H₂bptc)₂(H₂O)₄]·bpe·9H₂O(1),[Ni₂(H₂bptc)₂(H₂O)₄]·bpe·9H₂O(2),[Ni₂(H₂bptc)₂(H₂O)₄]·0.5bpp·7H₂O(3)(bpe=1,2-二(4-吡啶基)乙烯,bpp=1,2-二(4-吡啶基)乙烷)。用红外光谱,X-射线单晶衍射对化合物的晶体结构进行了表征,并对这3个配合物的热稳定性进行了测试。化合物1~3为单核结构的配合物,它们均通过分子间氢键形成三维超分子结构。     

第一性原理研究MgZn2相的电子结构及磁性质

运用密度泛函理论的第一性原理计算分析了MgZn₂相的电子结构及相关磁性质。能带结构和态密度分析表明Zn4s和Zn4p轨道、Mg3s和Mg3p轨道分别发生sp态杂化,然后杂化态之间相互作用而形成Zn-Mg键;Mulliken布居分布计算显示:Zn₁-Mg(Zn₁是处于晶格边缘的Zn原子)和Zn₂-Mg(Zn₂是处于晶格内部的Zn原子)电子云重叠布居数接近0,电子密度分析显示Zn-Mg之间电子密度分布具有明显的定域性。结合上述结果与Zn、Mg原子的电负性差异,确定Zn-Mg键为极性共价键。分态密度(PDOS)分析显示,Zn₁-Mg键和Zn₂-Mg键的差异主要表现在Zn₂4s轨道在-10~-6 eV区域对成键的贡献度高于Zn₁4s轨道,而Zn₁4s轨道在2~5 eV区域对成键的贡献度高于Zn₂4s轨道。进一步对MgZn₂的积分自旋态密度和磁矩计算表明:MgZn₂磁性质表现为顺磁性,其磁性主要来源于Zn₁-Mg键中的2个自旋相同的未配对电子;MgZn₂的顺磁性特性将使Al-Zn-Mg-Cu(7xxx系)高强铝合金产生磁致塑性效应。     

ChemInform Abstract: Structure,Ionization, and Fragmentation of Hydrogenated Aluminoboron Clusters: Al2B2H2n (n = 0—6).

Energetic and structural stability of Al₂B₂H_2n (n = 0—6) clusters is investigated by DFT calculations and a stochastic search algorithm.     

Polyaspartamide–Polylactide Graft Copolymers with Tunable Properties for the Realization of Fluorescent Nanoparticles for Imaging

Here, the synthesis and the characterization of novel amphiphilic graft copolymers with tunable properties, useful in obtaining polymeric fluorescent nanoparticles for application in imaging, are described. These copolymers are obtained by chemical conjugation of rhodamine B (RhB) moieties, polylactic acid (PLA), and O‐(2‐aminoethyl)‐O′‐methyl poly(ethylene glycol) (PEG) on α,β‐poly(N‐2‐hydroxyethyl)‐d,l ‐aspartamide (PHEA). In particular, PHEA is first functionalized with RhB to obtain PHEA–RhB with a derivatization degree in RhB (DD_RhB) equal to 0.55 mol%. By varying the reaction conditions, different amounts of PLA are grafted on PHEA–RhB to obtain PHEA‐RhB‐PLA with DD_PLA equal to 1.9, 4.0, and 6.2 mol%. Then, PEG chains are grafted on PHEA‐RhB‐PLA derivatives to obtain PHEA‐RhB‐PLA‐PEG graft copolymers. The preparation of polymeric fluorescent nanoparticles with tunable properties and spherical shape is described by using PHEA‐RhB‐PLA‐PEG with DD in PLA and PEG equal to 4.0 and 4.9 mol%, by following easily scaling up processes, such as emulsion‐solvent evaporation and high pressure homogenization (HPH)‐solvent evaporation techniques.

     

Baroque glass mosaics from the Capela de São João Baptista (Chapel of Saint John the Baptist,Lisbon): unveiling the glassmaking records

For the first time, 18th‐century glass mosaics from the Capela de São João Baptista (Chapel of St. John the Baptist, Lisbon) were analysed by Raman microscopy (RM). This masterpiece in baroque mosaic art had one of its major contributors the most famous glassmaker in Rome, Alessio Mattioli. Mattioli was celebrated because of the opacity of his mosaics and the astonishing number of hues he was able to produce for mosaic decorating Saint Peter's Basilica in Rome. This study had two goals in mind: (1) characterising the materials involved in the manufacture of these glass mosaics and (2) lengthening the understanding of what was left of Mattioli's glassmaking records. As expected the mosaics presented a high ratio of crystalline phases, making RM the ideal technique for non‐destructive analysis. The mosaics contained a white ‘background’ or opacifier added identified as Ca₂Sb₂O₇. The yellow tesserae are opacified with lead antimonate (Pb₂Sb₂O₇) and ternary oxides, structures related to lead antimonate but with other ions entering the position of Sb⁴⁺ (namely Sn⁴⁺). Those ternary oxides are pervasive in most colours, admixed with other colorants. The red, orange, pink and brown colours were accomplished with cuprous oxide (Cu₂O) and admixed with a ternary oxide to create the latter three colours. The red copper‐based colours were made according to the procedure to make a ruby copper glass and with the exception of the red colour; all mosaics exhibited a dark layer on each side of the mosaic, named scorzetta. This layer is the outcome of an oxidation reaction because of a quick cooling process and is composed of CuO. Finally the blue and green colours are accomplished with cobalt oxide and copper oxide, respectively, and the purple/black colour with manganese oxide. Copyright © 2015 John Wiley & Sons, Ltd.